FAQ

Current Position > Home > FAQ

DateTitle

  • 2014-10-25What is the difference between "Asymmetric", "Symmetric" and "Super- symmetric®" Two-Post lifts?
    Asymmetric lifts move back the center of gravity of the vehicle. This benefits passenger cars, allowing the door to swing open behind the lift column, minimizing the risk of door damage.
    Symmetric lifts evenly distribute the center of gravity of the vehicle between the lift columns. Allows the door to swing open in-middle of the lift column.
    Super-symmetric® lifts are the best of both which includes 2-stage rear arms and 3-stage front arms,allows the operator to collapse the front arms to easily lift a short wheel based vehicle and extend the arms to raise a long wheel based vehicle.

  • 2014-12-11What are the floor requirements to install a lift?
    Concrete must be at least 4” thick, in good condition and must be of test strengthe 3,500PSI (250 kg/cm²) minimum.
  • 2014-12-11What type of electrical requirements do I need?
    Standard requirements is 220V single phase or 380V 3 phases
  • 2014-12-11What are the fluid requirements for lifts?
    For a good cylinder life cycle use a brand name hydraulic oil 46# 
  • 2014-12-11How long will it take to get a lift?
    Your distributor may deliver the lift the same day if in stock.  Factory production times have an average of 45 days plus transit time to the destination.
  • 2014-12-11How about the payment term ?
    Payment terms are irrevocable Letter of Credit at sight or 30% wire tranfer to confirm your order and 70% wire transfer payment prior to loading your order onto a container or truck.  Orders must be prepaid 100% prior to shipment.
  • 2014-12-11What is the warranty on my Lift?

    Peak offers one of the best product warranties in the industry from the original factory commercial invoice date in the industry as follows:
    1.Steel structure components(including Columns,Carriage,,Lifting Arms, Top Beam, Floor Cover,Platform,Cross Beam,Car Drive-in Ramp, Scissor,Baseframe etc.) warranty for five years. 

    2.Hydraulic parts (including cylinders, oil seal, oil hose, fitting etc.)warranty for two years. 

    3.Other parts(no including consumption parts such as rubber pad),electrical components, power unit warranty for one year.

  • 2014-12-11What are the lifting capacities of Peak Lifts?
    From 6,000 lbs to over 16,000 lbs or more.
  • 2014-12-11How do I determine the type of automotive lift that would be best for me?
    Discuss your automotive lift need with your local distributor. He will be able to recommend what is best for you.
1